GE Profile Spectra JGBP90 Gas Kitchen Range "flames shooting oven lights" Questions

...shooting flames out of the holes in the bottom, and there was a really strong smell that burned our eyes. Any ideas what might be causing this? yea sounds like you have a stive set for natural gas ...

...oven is turned on it shoots flames up from the bottom of the oven almost to the top. How do we adjust the flame? greg, sounds like your needle valve is not seated. Remove the bottom drawer. Look back ...

...flames shooting out. Disconnected plug from wall and have been using lighter to start burners. Any idea as my 10 year old whirlpool super capacity 456's right front control knob started to burn ...

...oven cleaner. they look great but now the flames do not go through them and disburse. I need to use a lighter to light them and the flame shoots straight up Your burner caps have gotten clogged and ...

I have a Maytag gas over/stove, Model number MGR5755QDW. The broiler heats, but the oven does not. What are the possible causes and how do I troubleshoot? If you are having problems with the oven, the

Hi: I just installed Frigidaire gas range and have a couple questions. 1. 2 surface burners each have flame too high on only half the burner. it shoots up pretty high. How can I adjust this? 2. When ...

flames were weak, shooting out perhaps 1cm from the burner. NOTE: For whatever reason, if I opened and closed the oven door every 30 seconds or so, the oven would start. If I just left the door closed

...oven orfices. When lighting the range, I had excessive volume of flame. The burners were shooting at least 8-10" high above the burners, and the ovens are at a roar. Please assist! It is a gas ...

oven range wont make clicking noise anymore. it lights The clicking noise no longer comes on after I cleaned it. I removed knobs also and soaked them. I have to light them burners manually to get them

...flames thru burner for broiler or oven. It uses an electrical pilot. This stove/oven is only 3 yrs old. help! TX! Al Click on link below and go to page 46 on the Adobe PDF of your model and there are ...