What size socket wrench do I need to remove the spark plugs it is either 13/16 or 9/16
how to remove rear seat There are some bolts at the bottom of the seat normally and at the back. You may need a socket wrench for this. Usually size 13 or 14 mm.
...COMPUTER 11. Traction Control Indicator Light (If installed) 12. ABS Warning Light (If installed) 13. Seat Belt Warning Light 14. Oil Pressure Warning Light 15. Charging System Warning Light 16. ...
How many screw's need to be removed from the head of the motor in order to remove it? There are 13 of them, and I have already removed 10 of them, but the other 3 remaining are very tight. The car is ...
...vapor locking, common problem in high temp/altitude states. Call the dealer and see if campaign t-13 applies to your car, if the car was originally sold in a low altitude state, it won't apply. I ...
...10. Leaking intake/exhaust valves 11. Stuck intake/exhaust valves 12. Out of Time (valve timing) 13. Defective Engine Control Unit (ECU) 14. Blown Head Gasket 15. and the list goes on and on and ...
...The first thing you should do is check the voltage to the coil. the voltage should be around 12 or 13. If their is then the coil could be bad. Buying new spark plugs and wires would not hurt. Try ...
...how do I change the thermostat. follow the hose to the engine. Proably need metric tools proably 13 to 19 mm. undo the clamp. slide the hose off. undo the bolts. to ck thermostat put in pan and ...
...with a Volt Meter while the engine is running. The Alternator should be putting out between 13-14 volts, anything less and you have a bad Alternator. Check all Battery, Starter, Ground ...
...set it to DC volts and connect it to the battery terminals and make sure it is reading between 13 to 14.80 volts.If not it will need an altinator too.If the car hasn't been in the northeast ...
31 questions posted
Usually answered in minutes!
1,180 Questions
1,029 Questions
656 Questions
508 Questions
493 Questions