GE Profile PSI23NCR Side by Side Refrigerator "artica cold" Questions

...Artica SxS Model #PSS25NGMD: Food on fridge side was freezing, fixed damper door. Now the freezer is getting way, way too cold. Just checked it and it is at (-19). Fridge side is fine (37). Any ...

...artica is not getting cold. The fan works, but it appears the compressor is not activating. The refrigerator is only 7 years old. OK the Artica is complex in that a failure with the compressor not ...

Artica side by side stainless steel wont get cold The freezer says 30 degrees but is warm and the Fridge is 46. If anyone can help I would appreciate it. The Profile and Artica are good refrigerators.

...Artica, model # PSI23NGMD WW side-by-side. The refrigerator side temp is set on 37 but it is stay between 24-27 degrees F. veggies and other foods are freezing. I checked the ice dispenser door, as ...

...Artica. The problem was a broken damper. It allows the cold air in from the freezer side. With it broken, there was a steady flow of freezer air coming into the frig side. It was easy to fix. I ...

...Artica that I recieved from an associate I believe it is a couple years old model number PSC23NGMA WM, serial number GA402455. It is too cold and it is freezing the vegetables when I try to set the ...

...Artica icemaker does not make ice. model # PSC235GNA. We still get cold water . use a thermometer make sure freezer is normal operating temp if freezer is cold enough and water is filling ice maker ...

...profile Artica, refrigerator side too cold. Keeps resetting temp to 27 degrees. Freezing everything. Unplug for 20 seconds & plug back in... if keeps happening, replace the front panel

...artica model number pss25ngma the refer part freezes evertyhing. I have adjusted the temp but it goes back to 32 waht can I do? check the evaporator fan; listen to see if it is running check the ...

...Artica I have a GE refrigerator, the freezer is'nt cold, the motor in the back of the freezer is not running, What can I check to see if it is the motor or the circuit board? You say the motor in the ...