GE Profile PSW26P Stainless Steel Side by Side Refrigerator "removing cover dispenser" Questions

...dispenser cover. If not, push down on the top of the dispenser cover and pry out on the bottom of the cover with a flat tip screw driver to remove it. Pull to dispenser module cover up to release the ...

...dispenser cover , but inside the dispensing area , between the grill and the cover , insert a small screwdriver about 1 " in on both sides , and push down and inward , forcing the bottom of the cover ...

...dispenser front cover assembly in order to access the ice door? No screws-must pop off if you know the secret spot to pry. Thanks, jthaxter How do I remove the ice/water dispenser front cover ...

cover It is possible that the switch at the dispenser switch is defective but not as likely as the water control valve=> W10408179 found on the rear of your refrigerator. The coil may be burned out

dispenser cover. locate your handle or push button either you will remove the front cover to find the switch sometimes you remove inside the door behind the dispenser. but that sounds like the trouble

...cover to the dispenser housing. This will also free the control bracket from the housing although it will remain tethered to the freezer door by the wiring harness. (Fig. 28) 3. Disconnect the wiring ...

...dispenser door assembly Remove the top freezer door hinge cover , and disconnect the plug there . This will remove the power to the door . Inside the lower part of the dispensor cover , inside the ...

dispenser cover on each side of the bottom. Remove these screws and push up on the dispenser cover, there's 3 hooks on the top. Unplug the harness from the dispenser board and get the cover out of the

Dispenser Components  1. Unplug the refrigerator power cord.2. Remove the overflow grille from the housing.3. Unsnap front cover at the bottom of the housing. (using a flat blade screwdriver, and

...dispenser cover from the front. How do I get to the water dispenser? Remove the dispenser cover by gently prying starting at the bottom going round and round a little at a time to prevent from ...