Lakewood HV 18-c Floor / Box Fan "wire 3 speed" Questions

...wire 3 speed fan switch with 3 wire 3 speed fan switch. Is it possible?? Hello, I'm wondering if it is possible to wire a 4 wire 3 speed fan switch to a 3 wire 3 Speed fan switch. The four wires ...

3, and black wire in 2. 5 wire capacitor two black wires pigtailed to red wire going to reverse switch, one orange wire to switch 1 position, other orange wire to switch 3 position, red wire pigtailed

...to operate a 3 speed fan, you will need to have 4 wires going to the fan from the switch-----one wire is the common Neutral, the other three are : a single wire for each speed. Good luck, ...

...3 speed motor. There are 6 wires: Red wire. Black wire. White wire. Yellow wire. Gray wire. Blue wire. The motor has a 4mu 250volt capacitor. This fan has an oscillating grill with independent sync ...

3 speed switch wiring schmatic What I did was (but be VERY VERY carefull) is have the fan plugged in, and check which wires give which speed when you touch the main wire. VERY carefull. I'm not liable

...cheap multimet from hardware, install battery, set to read ohms or the upside down horseshoe symbolCopy following link for testing ...

wire. Here is how I wired it: L white 1 black 2 blue 3 yellow. I get nothing on all but 1 speed (not sure which one) where the motor hums but the fan does not turn. It does rotate freely by hand. This

...3.The wire coming to the motor has 3 wires:black,red,white.The fan is 2-speed.This is the right motor.How should the wires be connected?Can the fan only be connected as a 1speed?The current passes ...

...3 speeds) and a common wire. the common wire will go directly from the fan motor to the power source/cord and the other 3 leads will run through the switch. you could even use a standard dimmer-style ...

...I originally put B (the Blue Wire) into spot 3, leaving 1 unused. But that made the pull order go OFF-OFF-LOW-HIGH. So moving the Blue Wire to the 1 slot resulted in OFF-HIGH-LOW-OFF Hope this