GE Profile JTP56 Electric Double Oven "bake element 2" Questions

Ad

Question about Thermador Ovens

1 Answer

Bake element does not heat I have Thermador Sc272ZS/01. The bake element does not heat on the top oven but I do have some heat from the top broil element. The bottom oven works. After removing the ...

Ad

Question about Kenmore Ovens

1 Answer

bake heat-element? If so, you may need to replace the baking Heat Element. (Ensure you do not use aluminum foil around your heat element to prevent your oven from getting dirty) To replace your baking

Ad

...bake element is defective. You can remove it and check it with an ohm meter. A good one would be roughly 20 to 40 ohms, a bad element has high (or very high) resistance. 2) The oven thermostat. It ...

...bake element is burned out. The bake element is the black, pencil- thick tube at the bottom of the oven. When the oven heats, the element glows red. This element has an expected life-span of several ...

...bake element typically is not used. If the broiler does not glow, it is likely a burned out heating element. Use This procedure below to confirm the failure. With a multimeter, use these steps below ...

...Bake Element off during baking. We have a GE Oven with a model number starting with JTP15BW. When we attempt to bake with this oven, the broil element comes on and the bake element does not. This ...

...bake element(bottom) is usually on at full power with 240 volts to it. The broil element(top) is usually on at 1/2 power 120 volts to help even out the temperature. My guess is your bottom element is ...

...bake element in, Remove them and pull the element out untill you see the end of the element and wires attached to them. NOTE : Go slow. You will see the wires at the end of the element. Just take a ...

Question about Dacor Ovens

2 Answers

...Clothing More To me, although it's possible, it would be unlikely that both element are burnt out as you said bake and broil doesn't work. Most likely a control issue or a fuse if your model has

...Bake element, a broken wire to the Bake element or a bad control board. You have to remove the Bake element or to pull the range off the wall to perform the troubleshooting and find out which part is ...

Not finding what you are looking for?
GE Profile JTP56 Electric Double Oven Logo

344 questions posted

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...