Leisure HOMEPRIDE Electric Fireplace Heater w/ Remote "won 39 light control" Questions

...won't burn. I have a Williams gas wall heater model #5009822. I can light the pilot light but the main burners won't light . Have changed the thermostat and that did not help any. cannot ...

...won't light i changed the thermo coupler and the pilot light does stay lit but the burners won't light If you are referring to a gas fireplace: Make sure the pilot knob is turned from ...

won't light. All controls are in correct position. I have a 5301. Connected last year, worked fine. Installed new batteries, connects and beeps, but fireplace won't light. All controls are

...won't come on. We changed the light bulbs. Nothing will work. What do I check now The practical user's guide for the elec fireplace ADL-2000M-X. I have a remote control. When I purchased ...

won't light. Exhaust blower kicks in for about 7 seconds then shuts down. While viewing the pilot light inspection hole I do not see the ignitor glow. The reset switch cannot be pushed in to reset

...won't turn on either when it's called on by the thermostat or when I switch the stove to "on". When I switch the control to "on" nothing happens. The pilot is lit, the propane tank ...

won't have to be replaced at this time. It sounds like the burner(s) is clogged and and needs to be cleaned To do this, turn the pilot light OFF and allow the unit to cool. Remove the front of the

turning the control knob to 1, 2 or max does not result in gas flow or heating ! Has the Gas Control Knob been turned from the Pilot position to the ON position? If not, it won't light the burners

...Getting 24 volts to the gas valve? No voltage from control board check fuse on control board. Replace control board. Any rollout switchs that are open and you won't get 24 volts to the gas

won't stay lighted. What can I do to fix this? Is this an older furnace where you have a pilot light? Are you saying the pilot light will not stay lit? If thats the case then likely you need a new