Question about Leisure Heating & Cooling
...flame motor assy. It's direct drive to the motor. Either the motor is bad or the Flame Speed Control circuit board is bad. Test the motor with a 9V. battery. If the motor spins, replace the Flame ...
flame motor. The controller on the board has fried. I built a regulated 12 v dc power supply and tapped it into the bulb circuit so it will power the motor when the bulbs come on. You may have to find
light works but flames do not sounds as thought the motor has stopped running that spins to create the flame effect, they are a little synchron motor if i recall correctly.
Question about Heating & Cooling
...flame motor for my electric fireplace? A week ago the flames suddenly froze. I just want to replace the flame motor, but im not sure of the exact thing im looking for or where to get it You need to ...
...motor spins it's good. Chances are the FLAME SPEED CONTOL (Part Number 10001589) circuit board is bad. I had to replace mine. It's at the bottom of the fireplace behind the contols panel. Good Luck ...
Question about Leisure Heating & Cooling
flame need the motor replaced Any Vermont Castings stove dealer can order the parts for you. Test the motor first with a 9V battery. If the motor turns it's most likely a defective Flame Speed Control
motor check the flame rod to see if the flame hits it. There is a tray the flame will follow and it gets filled with rust and debris. Check your vent pipe for obstructions. Make sure you do not have a
...you please tell me if there is anything I can do to stop it. Thanks You need a new synchronous motor. This is the small motor which turns the flame effect rod. They are notorious for becoming
Question about Blue Flame Heating & Cooling
motor, ignition, nice blue flame in heat tubes, then the flames go out. (see optional details) This is an intermittent problem that just started in the past few days. LED 1& 2 Slow flash. Not sure
...flame / blower motor - when it shuts down or I reduce the call for heat, blower motor and inducer motor stay on and I get an error code saying "false flame sensed, sticking control valve." ...
362 questions posted
Usually answered in minutes!
2 Questions
1 Questions
