Question about Honeywell Heating & Cooling
...Temp diff)= Btu/hr(Temp diff)= Btu/hr / 1.09 (CFM) Temp diff is proportional to 1/CFM so 1. As CFM is increased the temp diff is decreased. 2. As CFM is decreased the temp diff is increased CFM= ...
Question about Dayton Heating & Cooling
...in temp should be in range of number stamped on unit name plate for acceptable diff . If diiff you read is over nameplate rating must correct air flow and also check for restricted flue exhaust
Temp is set higer it will not turn on. U have to manually shut it if or on. there is suppose to 6 degree diff,but I have set it as high as 20 degrees & it still wont work. New remote & new batteries &
...diff than gas heating. On electric heat multiple strips and a fan of course. But if they all come on at the same time then the breaker would trip so they use a sequencer for that job. Gas heat uses a ...
...temp sensor,and currently have the usual(and sounds like very common)slow drip from the pushrod on the DHW pressure diff valve(cup under the boiler is catching the very occasional drips).the micro ...
362 questions posted
Usually answered in minutes!
2 Questions
1 Questions