GE JVM1190SY/WY/AY/BY Microwave Oven "runs heat unless hit" Questions

...heat runs but does not heat. all lights and fans run. all instruments function. but no heat. Microwaves contain high-voltage parts that can be deadly, even when unplugged, unless handled correctly. ...

heat unless a small piece of wood is under the door. Now this trick does not work. Any Idea what part is broken I would say the mount for your bottom or top door switch is loose, misaligned, or broken

...heat anything up. maybe the magnetron on unit... there is a thermostat on the magnetron or right below it that will go bad.you will have to gain access to it behind the control panel... unplug unit ...

...unless they know how to trouble shoot high voltage equipment! I think a little more warning about this is due. Not just a sales pitch about how you may be able to fix their oven boards as most could ...

...hit the start button. Again no power on the display. I've changed the 3 latch switches hook on the door and two PCB escutcheon base. It makes the same thing blown the fuse and no power on the ...

...unless you have confirmed the fault. It is possible that the Magnetron is leaking and sparking to the ground. As you have mentioned it was stored, it is quite possible that insect can get into the ...

...unless you operate in micro mode for more than 3 minutes or so, then it shuts down again. Only other symptom is that it seems to be making more noise in micro mode - as though something is loose ...

heat and steam from the unit. If that is not running the unit will shut down when it gets too hot and the power will come back after 10 or 15 minutes (once the temperature abates.) If the fan motor is

runs when door is closed. it does not heat and the digital screen is off until i hit one of the defrost buttons. sounds like a lot and im ready to get a new one unless it is just a diode or something.

...runs unless i unplug it. It will not heat light is on clock works .will not let you put in minutes to cook . the child lock is not on. This is usually caused by either a bad door switch or a loose ...