Question about GE SpaceMaker Microwave Ovens
Handle broke and can't screw in the bottom screw of the new handle The new handle has a place for a screw to be screwed in on the top part of the handle but the bottom part has no hole for a screw. ...
GE Profile XL1800 Spacemaker Microwave We can not figure out how to put the filter in at the top. The instructions say to remove two screws, but there are not any. Please help. remove 2 screws that ...
Question about GE SpaceMaker Microwave Ovens
...front panel then remove its face unit as it will have a back guard unit so they split apart with screws usually counter sunk machine screws then the front unit section will have the handle
...spacemaker xl and its door handle is broken. I bought a new one and now I am unable to remove the screws from the door. is there anyway you can help me pop the plastic off inside door you will see
Question about GE SpaceMaker Microwave Ovens
...certainly can't get to it. My Spacesaver bulb replaces from the top. You have to remove 2 screws that hold the upper vent cover. W/ cover off you will find a phillips head screw about the ...
Question about GE SpaceMaker Microwave Ovens
...separate the door panels (as shown in the attached photo) and then you'll see the previously hidden screws you need to remove. Or you can watch a YouTube video (not a video I made) that demonstrates ...
Question about GE SpaceMaker Microwave Ovens
what screws do I loosen to get micro out of bracket. I need to tighten the bracket holding the micro. What screws do I loosen to remove micro so I can get to bracket? THE TOP SCREWS IN THE CABINET
...off power to the microwave first before servicing it! At the top of the microwave there are three screws. Remove the three screws and slowly pull down from the top to get the plastic airvent out of ...
...in a support cabinet that was fastened to the wall behind. First, I removed the phillips head screws behind the louvered vent above the microwave. Then, I removed the screws of the slanted ...
Question about GE SpaceMaker Microwave Ovens
... I took the case off of my unit and removed the control panel. Upon removal I found a small screw just sitting between the back of the board and the plastic. The screw was touching the ...
4,203 questions posted
Usually answered in minutes!
257 Questions
57 Questions
46 Questions
27 Questions
23 Questions