GE Spacemaker JVM1640SJ Microwave Oven "clocking motor running" Questions

Cycle stops and won't run until the clock is reset My microwave frequently stops in the middle of a cycle and won't run until the clock is reset. The magnetron cooling fan blade is either slipping on ...

motor will still be running when you hit start but there is no fan on it. The fan keeps the mag cooler. The mag will heat up too much and then shortly the oven automatically shuts everything down when

running, the buzzing will not stop until the vent flap closes again; it moves really slow and sometimes will not close at all, i have to push the motor so that the vent can close and the buzzing noise

oven shuts down after a few seconds into cycle time for cooking when the microwave is turned on, it shuts down and display goes blank, asks to reset clock and date before it'll work again...doing it ...

...motor is running but there is no fan on it. The fan keeps the mag cooler. The machine shuts down when the mag gets too hot because the fan blade is just lying in there, Needs to be glued back on the ...

...running! If you or someone you know want to replace the magnetron yourself, you will need to remove the oven from the wall. If so, the installation instructions are very handy, and it's best to have ...

GE Spacemaker Oven shuts off after 3 min My GE spacemaker oven shuts off after 3 minutes when cooking on high, then resets itself 10-15 min later. I don't think that I hear a fan spinning when the ...

...running. the power is going to the microwave, clock , timer and contol panel work but the cooking part is not.(do not set off or launch the motor.) Its your Mag tube (what makes the heat) It will be ...

...all work but no noise like a motor not running. We would really need the full model number from the tag on or in the oven. Please post a new help request with that plus a recap of your exact

Help!Need This Fixed!! Our in the countr above the oven microwave motor ust stopped working.Clock works though.Less than 2 years old. If the motor alone has stopped working, you can remove the motor ...