GE JVM1650 1000 Watts Microwave Oven "time display goes" Questions

...time on display goes off and clock time comes back. That would be a bad upper interlock switch and charred connector. If so, see: http://031d26d.namesecurehost.com/mwd/safety.txt ...

time and pressing start, it will turn on for about 1 sec and then immediately goes off. The display comes back with PRESS CLOCK. After setting the clock and trying to use the microwave, the same thing

...time expires the display shows ''Food is Ready'' but the microwave never goes on. Sounds like you have a faulty control panel. I would use a meter and test the power from the control board to the ...

display and lights all go out like a power failure. You can unplug unit, the plug in again and all works until the next time it is used. If it's doing that u may have a short in the cord somewhere

while heating, and goes through menus on its own or keypad unresponsive. Resetting it, restores use for a short time.Main control board, or the keypad display board? It could be the main control board

...time, the led panel goes dark although the time still displays correctly. When I press the "Light" button which is not on the led panel, the led panel shows the bulb and the panel lights up again ...

display screen shows 66666 and beeps continually. I unplugged it, then replugged it. I could set the clock & use it for about 3 minutes without problems. A few minutes later, it goes back to the 6

...time so the problem is not due to power failures. You have a faulty display module due to one or more components leaking. Some models have a seperate display module that can replaced without the ...

...display shows the time i want it to cook. I press the start button but nothing happens. The digi display does the countdown as if the microwave is cooking. The light is supposed to go on inside when ...