GE JVM1650 1000 Watts Microwave Oven "clock display working" Questions

clock display, you can choose not to have the time displayed. To choose this option, press the 0 pad for about three seconds. To Turn the display back on, press the 0 again. Touch the clock pad. Enter

...Clock display not working correctly My microwave (Sharp R-420BK) has worked fine until I moved it, recently. Now the clock display is "messed up". There are numbers, but they don't display correctly. ...

...clock/display/control board. This is usually a VERY expensive solution. In some cases more than it's worth as compared to replacing the entire microwave. The clock not 'sticking' is a rather unusual ...

...display shows PRESS CLOCK. I have a GE XL1800 Spacemaker microwave that is not working. After setting the COOK time and pressing start, it will turn on for about 1 sec and then immediately goes off. ...

...clock display is blank. All features seem to work fine other than the clock does not display when the unit is not being used. When cooking, the clock display lights up and counts down as it should. ...

...display, the steps usually are to first turn off the microwave oven completely. Then power it on. Touch the "Clock" or "set time" pad and key in the current time. Press the set pad to lock the time. ...

...lever and turning it 1/4 turn. If this works it would indicate that your timer has a start and finish time and that the oven is not working because the clock has rotated around to the finish

...Display asks me to set clock, it beeps 3-4 times and then displays "--SE--" Model # SMH9187 Serial # J4LW7MOZ100264P From page 23 of Service Manual, --SE-- is a membrane keypad error. ...

...clock display is dim in the middle only. I just replaced the control board on my GE microwave HVM1540DN1BB and got all my numbers to work again. But now the digital clock display is dim in the middle ...

clock and it works fine for a few days but then it happens again. No other clocks in the house loose their time so the problem is not due to power failures. You have a faulty display module due to one