Frigidaire Affinity AEQ6000WH Dryer "error code e68" Questions

error code. What else will cause this error? Hi yoyosam66... Your e68 error code means: Please take time to rate me ------------------------------------------------------------------------------------

...alarm starts beating. It marks e68 in the board See my answer to the similar question. Error Code E68 on frigidaire affinity dryer. dryer will run about 2 minutes and then shut down with error code ...

...error code e-68 on a galaxy series dryer mean E68 error code is a stuck button error code. You can try to wiggle each button on the control panel to make sure they are all functioning freely. If so, ...

error code E68 means a key or button is stuck. Check the buttons by pressing them one at a time to find the stuck one or enter the service diagnostic mode then the key function test. Click on the link

...error code. "E68" usually indicates that one of the keys (buttons) is stuck closed (active). You may enter "Function Test Mode" and perform Key Test to determine which button is at fault. To perform ...

...error code e68...dryer will not start The dryer will not start.The problem originally started when we stopped the dryer to chek clothes. Once we closed it to start again it would not start back up. ...

...error code E68 is a stuck button error code. I recommend checking each button to make sure it loose in the plastic console. The button should rock side to side a little bit. If all the buttons are ...

...error code E68, but all buttons seem to work. 1. Dryer stopped working 10 minutes into cycle, All control mode lights flashing. 2. Retrieved error code e4A (cycle ran too long). Reset and ran for 10 ...

...error code. have cleaned the lint area. still get error message. the dryness button seems to have gone haywire. This error code E68 indicates that a button or key is stuck. Press the buttons/keys ...

...ERROR CODE FRIGIDAIRE DRYER MODEL NO GLEQ2152EE0. CAN YOU DIRECT ME TO A SPECIFIC PART NUMBER? E68 for this model number says in manual that this is for a "button stuck" or held down for more than 30 ...