...set the tuner mode. 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight the Settings icon and press OK. The Settings menu is ...
Question about Televison & Video
...scan for broadcasted channels It is no different that channel scanning for cable or analog over-the-air channels. You simply ensure that you have selected the digital tuner of the set prior to ...
Question about Televison & Video
...during channel auto scan, there are two possibilities. 1. The tuner of the set is faulty. 2. The set do not get any signal to process [might be
...Scan Mode" and use the LEFT/RIGHT arrows to set the value to "Digital" 9. Highlight "Start Frequency" and use the LEFT/RIGHT arrows to set the value to "CH 21 . . ." 10. Highlight "End Frequency" and ...
...not sure how to scan for channels most sets its done in the setup menu--select if cable or antenna and then select auto program, set will scan and store all available channels it can
Question about Hyundai Electronics Televison & Video
...set up..find auto scan and click it..then your lcd should be scanning and remembering all the channels thats been scanned,but before you do the scanning make sure that your antenna or your cable ...
Question about Insignia Televison & Video
...to it also. Go in the menu and make sure the antenna setting is set to AIR and not CABLE before you start the scan. If that doesn't fix your problem then something with the main board is the ...
Question about Televison & Video
...channel scan,message pops up stating PLEASE RUN CHANNEL AUTO SCAN, If when You scan, and you don't get at least one channel, it will keep showing You this message! look at screen it will show new ...
...set up the tv to receive the remainder of the channels? Thank you do a channle auto scan, you need to select CATV in order to scan for cable channels. after the scanning process, all the channels you ...
...set to scan, it found no channels. my satellite is working as my livingroom tv uses same reciever. how do I scan and find channels? chances are that your reciever is outputting conventional NTSC .. ...
72 questions posted
Usually answered in minutes!
194 Questions
156 Questions
51 Questions
56 Questions
53 Questions