Element Electronics FLX2211B 22 in. LCD TV "scan channels elements" Questions

...scan. Can you use a coxial cable and where is this connected on the TV put the co axel cable in the back , bypass this tv programming stuff put your tv on channel 3 or 4 and use the cable remote , no ...

...channels, but once the scan is done, the screen turns blue again and says "Please Run Channel Auto Scan". Not sure of the exact model of the TV but it is an Element flatscreen TV. Main system control ...

...channels. WA#2 = after a channel scan, go to the skip channel section of the menu, and if your remote has the colored buttons on the bottom scroll through the channels using the red and green (up and ...

...setup on a 32" element TV model no. ELEFW328 HDMI . somehwere in the main menu there should be auto scan. look for that then do it depends on what type of input you set in also Cable,sat, or antenna ...

my element tv will not show above channel 27 my tv will not show above channel 27 did you set it to cable an then do a channel scan

...channels on all settings but after the scan, the screen turns blue again with the prompt Please Run Channel Auto Scan. I can't even get it to play video games or DVDs. Make, model, and year please. ...

...working. To solve this, go to menu, TV, channel scan. After scanning channels the remote was fully functional. Also I discovered that channel guide was working as well. No need for a universal

element tv keeps saying please run auto scan May be there are some out of frequency channels. Go to searching menu option and use manual tuning for personally. Auto scan for all channels.

Digital tv channels When I scan for tv stations get 0. how can I change the scan from analog to digital channels? go to menu and select antenna type..

...reset n now it won't pick up any channels just says run channel scan and wen I do doesn't find one Main system control memory IC fault. Check and replace