Element Electronics FLX2211B 22 in. LCD TV "remove base" Questions

remove. Once removed, the base removal screws were exposed. Be careful, the screws were tiny and could easily fall inside the TV. If that doesn't help you, try searching online for your owner's manual

...base I have a dynex 37" DX-LCD37-09 and want halp removing the base not sure which screws to remove Remove the four small phillips screws facing the back of the TV/Base and the whole base will come ...

...remove the base to put in to a wall tns For the ASUS VH197D LED Monitor, turn it upside down so you are looking into the base of the stand. Squeeze the plastic tabs to unlock the base and pull. This ...

...remove the base, you simply take out 3 screws from the back near the base and pull out the stand gently. I can't remove the stand - have tired pulling out, back, etc. What's the secret????? Although ...

...broken and I am trying to buy one. There is a metal part that the TV sits on. To remove base you need to remove I believe it was 4 screws center lower back of TV, then pull off base. Hope this

...remove the base and stand, remove the two screws that are now visible after the base is removed and pry out the plastic stand. This will break it off at the hidden screws. You will be left with a ...

...remove the base, then on your model there is one screw in the center of the underside of the base. If you want to remove the neck of the base to then remove the 8 screws on the back of the tvs neck ...

...base. Remove them, pull the TV from the base, and replace the screws in case you need to use the base in the future. I suspect the problem others are having is that they only removed 2 of the screws. ...

Remove the base how do I remove the base for mounting There are 4 philips head screws down near the base, 2 on each side. Remove those and the base will slide out. Good Luck! Tried this myself on ...

...remove base stand in order to fit wall fittings Most LCD HDTV televisions come with the option to remove the base, refer to your manual for proper instructions on removing the base. But make sure the ...