Error E1 means thermistor failure, it flashes when the thermistor circuit is open. The dryer will not operate if the exhaust temperature drops below 18° F. or exceeds 250° F. To resolve this
...176;C ). Unfortunately you must do the measuring at the integrated board to which the sensor leads are soldered to. I`ve attached the image below of what to look for. **You`ll also want to check for ...
...176;C) 1 K ohms Roughly...around 9K ohms at room temperature if I'm reading the chart correctly. Take readings as listed and also double check the connector to make sure it is not oxidized. Try ...
339 questions posted
Usually answered in minutes!
208 Questions
116 Questions
93 Questions
75 Questions
51 Questions
