...is displayed, the oven lock is activated and the door cannot be opened. You need to make sure it is locked so you do not mistakenly lock the door. 2 Press and hold the "Stop" button on the oven ...
Question about Maytag Cooktops
...locked, then check the door switch and the latch switch. Replace the bad switch. The rear door switch is part W10107830, ...
Question about Kenmore Cooktops
How do I unlock the cooktops on Kenmore Elite Electric Range model #C970-440935 Clear the lock mechanism -- as indicated by the DOOR LOC light -- by pressing and holding in the oven door light switch ...
Question about Frigidaire Cooktops
How do I stop the door lock from flashing on my self cleaning oven I was going to self clean the oven,I pushed the clean button the door lock light started flashing but the door did not lock.I hit the
...clear. The "DOOR LOCKED" will continue to flash until the oven door has completely unlocked. Do the maintop burners work? Granting that it does, you can try confirming that the shut-off valve on the ...
locked and it will not start a self-clean cycle, it is also displaying an error code of "F91". The "F91" error code means that the door has exceeded maximum oven door unlock time. This means you could
Question about Frigidaire Cooktops
I have a drop-in oven from frigidaire.I started the self cleaning process the door did not lock and the light keeps flashing,I dont know how to stop it and i cant use the oven at all. Good Morning ...
Clear/Off" button on your microwave's keypad for around three seconds. Wait for the "L," which indicates the microwave is locked, to disappear from the display. Open the microwave using the open latch
clear off but the lock is still jammed Thank you for your post, wilma jones! I understand that the door on your Frigidaire range is not unlocking. I see that you have attempted several troubleshooting
Question about General Electric Cooktops
...locked and after cleaning started i lost power to entire house for a few seconds and power returned. later checked the oven and display shows LOC and the time. no other functions on panel works but ...
35 questions posted
Usually answered in minutes!
32 Questions
14 Questions
12 Questions
9 Questions