Eureka Whirlwind 4388 Bagless Upright Cyclonic Vacuum "need belt" Questions

Ad

Question about Kenmore Vacuums

1 Answer

...need a new belt. To access the belt you will have to remove the hood from the power head. There are 4 screws, one at each of the corners to take out. Once the hood is off you will see where the belt ...

Ad

Question about Vacuums

1 Answer

...belt. Belts don't need to break before they need replacing. They just need to lose some tension. This is what seems to have happened in your case and you should replace your belt. Regards, ...

Ad

need to check , belt , donot where to check,on need to check , belt , donot where to check,on model u5465-900, belt number 38528-033 Hello, If you click on this link, it will take you to a website ...

Question about Vacuums

2 Answers

...need to change the belt. You can get replacements here: Replacement Vacuum Belts Sounds simple to say belt is broken. My panasonic beater bar wont turn but belt is intact. The lever arm to hold the ...

Question about Hoover Vacuums

2 Answers

...vacuuming. Hope this helps The reason you smell burning is because the belt is stretched and worn and is slipping. You simply need to replace the belt. Here is the belt you need: Hoover Mach 4 ...

...need a new belt or is there a way to adjust the tension? No, once the belt is stretched and worn there is nothing you can do, you have to replace them. Here is the belts you need for your model: ...

Question about Vacuums

1 Answer

need to change a belt on my Hoover Concept One Power drive http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=766023 Generic problem for all Vacuums Need to change a belt Posted by gentilly on ...

...clutch system you need these belts: http://vacbelts.xps.convina.com/dyson-clutch-system-belt.htm If it doesn't have a clutch then you need this belt: ...

...belt you need to remove the primary belt. This is because the secondary drive belt runs inside the primary belt and can only really be seen clearly once it's removed. If you have any trouble locating ...

NEED A BELT THAT FITS A HOOVER MODEL U4423; The belt number needed is # 49258 go here > http://hoover.com/search/?q=49258ag&x=17&y=8 for your belt The part no 49258 belts for a Hoover U4423

Not finding what you are looking for?
Eureka Whirlwind 4388 Bagless Upright Cyclonic Vacuum Logo

54 questions posted

Ask a Question

Usually answered in minutes!

Top Eureka Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Jo Ri

Level 1 Expert

17 Answers

Alexander

Level 2 Expert

171 Answers

Are you an Eureka Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...