Zodiac Baracuda G3 Automatic In Ground Pool Cleaner "hose cleaner keeps" Questions

Ad

...force of the sucked up water moving gears inside the cleaner .. if yours is this way, then any blockage in the cleaner or in the hose attached would restrict the flow and keep the cleaner from

Ad

Question about Zodiac Pool & Spa

1 Answer

...cleaner keeps flipping over. Have moved the weight around but still flips. any suggestions Often when you are having this problem with automatic pool cleaners, it has to do with the hose. Make sure ...

Ad

Question about Polaris Pool & Spa

1 Answer

...cleaner operating, check that the swivels in the hose and the hose connections turn freely. Make sure the feed hose if floating. Then, with the Polaris turned off, spin each of the wheels. Make sure ...

Question about Zodiac Pool & Spa

1 Answer

...the cleaner. acorn bottle cap etc... The hose is just old and needs to be replaced. Here is a good resource for pool cleaner trouble shooting. ...

Question about Universal Pool & Spa

1 Answer

...cleaner runs up to it and the hose hangs on it. I keep my hose laying out strait when not in use. It does seem to stay on the sides also. If the eyeball diverter is not working, you might need to ...

Question about Zodiac Pool & Spa

1 Answer

...cleaner. Adjust hose weight. POOL PULSE (metering flow) The Pool Pulse is a flow meter that measures the volume of water flowing through your Zodiac cleaner. It must be used to properly set the flow ...

Question about Pentair Pool & Spa

1 Answer

...cleaner floats in water It doesn't seem to thoroughly clean the pool even after several hours. Sometimes it runs on two wheels sideways or floats. pool cleaners that twist,wheelie and flop over all ...

...hose balance is correct when the cleaner's seal rests flat on the pool floor and the drive tube makes a 45 degree angle with the floor. Adjust the hose weights one inch at a time as needed until the ...

Question about Universal Pool & Spa

1 Answer

...cleaner only toward your deep end. Secondly, if your hose is connected to your filter at the deep end of the pool, it could be that your hose is not long enough to cover the entire pool. You might ...

Question about Universal Pool & Spa

2 Answers

cleaner. Hose balance is correct if the cleaner's seal rests flat on the pool floor and drive tubes make a 45 degree angle with the floor. If the hose rises toward the surface at an angle greater than

Not finding what you are looking for?
Zodiac Baracuda G3 Automatic In Ground Pool Cleaner Logo

125 questions posted

Ask a Question

Usually answered in minutes!

Top Zodiac Pool & Spa Experts

john h

Level 3 Expert

29494 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a Zodiac Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...