Question about Mobility Health & Beauty
...motor from a rise & return disability bed and would like to re-use it for another application by just wiring a plug onto the end and connecting to the mains. The problem is that the cable has 4 wires ...
Question about Health & Beauty
be taken out of the chair and bench tested to make sure. The other option could be the wiring going from the controller to the motor. If that wiring has a problem, it would not feed power to the motor
Motor Wiring I have an inoperable Jazzy chair that needs new batteries and who knows what else. I would like to keep the drive wheels and motors. Each motor has 4 wires, 2 white, 1 red, 1 black. I ...
Question about Pride Mobility Products Health & Beauty
...on the joystick panel. Can I do something to fix the problem myself This is usually a code for a motor disconnect. You probably just accidentally put a motor in freewheel. A more serious issue ...
...Any ideas please Five flashing lights indicate Right Motor Wiring Trip- The right motor has a short circuit to a battery. Check all the connections and leads between the right motor and the
motor wiring fault, 4 yellow = Right motor disconnected, 5 yellow = right motor wiring fault, 6 yellow = Inhibit active, 7 yellow =possible joystick fault, 8 green = possible controller fault, 9 green
Question about Drive Medical Health & Beauty
wiring harness from the motor may be pinched or cut. The brake wires and pins may have become disconnected also. The brake lever may be in the disengaged freewheel position causing a fault, so put the
...motor cable visually and with a voltmeter at the connector. Look for cuts, nicks and breaks in the wiring and for grease oozing out of the gearbox. Flip the seat back and remove the top cover. ...
Question about Invacare Supply Group Health & Beauty
...wiring plug to the motor and remove the six bolts holding the motor to the frame. Separate the gearbox from the motor and take the motor to a rewind shop for repairs. Reinstall and it should be good ...
230 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: