Nordic Track /proform Treadmill Drive/motor Belt 118016 "moving incline working" Questions

...the incline not working. Please help. Thanks in advance Sue Because you are hearing the lift motor making a noise, it sounds like the gears in the motor are bad. The fix is to replace the lift

the treadmill will not incline Try calibrating the unit first, if this does not work than check below: 1. If the incline moves but you will not operate normally nor calibrate, check the wiring from ...

When I turn on the treadmill, the incline is stuck @ 12degree and the console beeps and I can not control the treadmill at all. What do I need to do? ICON CALIBRATION INSTRUCTIONS- INCLINE 1) Press ...

nordictrack apex4100i level incline will not work level incline will not work model#nttl18903 Try this calibration procedure. Turn the power switch on. Remove the safety key. Hold the Stop and Speed ...

...incline feature stopped working. I pulled off the cover and can measure voltages, but don't know what to check. Any ideas? ProForm Treadmills have a reset procedure for the incline function. With the ...

...incline stopped working. I was in the midst of going from flat incline to full and then back down again when it stopped. The incline numbers now register on the display, but it doesn’t move. Try to ...

icline does not work If the incline moves but only just a bit, it could be a problem as simple as the gearbox on the motor being jammed. Remove the motor from the treadmill, reconnect the wiring, and ...

...Incline... I have a Image 15.5 Treadmill it turn on Inclines but won't go I can walk on and move it myself but it is not working by itself.. First we need to do a calibration follow this procedure ...

incline does not work but incline motor runs for 3 to5 seconds proform415ct Incline motor runs a few seconds then shuts off incline does not move everything else works if the motor tries to work but ...

treadmill incline not work I bought a Proform 590T less than two months ago and now the incline does not work. It works perfectly fine 2 days ago, but now the incline does not move at all, neither up ...