...SPEED DOWN? for 5 seconds. The software version will appear in display window shortly before model number appears. Press ?ENTER? to accept correct model number IF YOU CANNOT GET INTO CALIBRATION ...
Question about Exercise & Fitness
...incline stops machine (incline on screen inclines), stop button doesn't do anything, hold down speed and will speed up but take pressure off and slows back to 1.0 Treadmill console needs to be ...
...speed down) button. Most likely the directional PCA has popped out of its housing. There is a small circuit board underneath the quick start button that works the controls. They are notorious for ...
Question about Tunturi Exercise & Fitness
...SPEED DOWN? and hold buttons pressed simultaneously 2. LED scanning mode for verifying display functionality 3. Press ?ENTER? to scan DATA LINES to verify display functionality 4. Press ?ENTER? to ...
...speed buttons and nothing works. Stop button does nothing. Incline is at max and down button does nothing. Is Epix 450MX Model EPTL096056.1. Checked all wires and nothing found lose. This may well be ...
Question about Life Fitness Exercise & Fitness
...speed in cool down mode, and also pauses after touching increase button on screen. both issues are dangerous this has happened to other people in the gym on other lifestyle 95T's. and was one ...
...SPEED DOWN? and hold buttons pressed simultaneously. LED scanning mode for verifying display functionality Press ?ENTER? to scan DATA LINES to verify display functionality Press ?ENTER? to scan SACN ...
Question about Exercise & Fitness
...down. I have to turn it off It starts working okay and slowly starts speeding up until it is going berserk. If I press the Stop button, it does not stop. Actually, none of the buttons work after it ...
Question about Proform Exercise & Fitness
...speed from 1 down until it stops with beeping heard at every push of the button. I suspect the console is bad but im looking for a profesional opinion. 1) adjust the speed sensor, test it, clean it, ...
...down speed + and the stop button on the console, while holding them down replace the key. release the buttons, then press stop once. then press and hold speed + until speed reaches max. unit should ...
49 questions posted
Usually answered in minutes!
346 Questions
56 Questions
48 Questions
44 Questions