Roland Juno-D "switch" Questions

Digitech RP 90 foot switch is not working I have a digitech RP 90 effects pedal but recently one of the foot switches just stopped working. It doesn't move the LED number on the screen when I press it

Not getting a 110 votts to transformer gettting 110 to switch but not getting 110 to transformer should i be getting 110 to transformer to deleiver power to sur board Measured where? You're ...

guitar amp channel switch repair the channel select switch doesnt work. theres no distortion when switched on. it doesnt light up either. clean works fine Replace the switch. You gave no make/model ...

The distortion on my Boss DF-2 doesn't work. When I hit the switch it just comes on and then off Sounds like a defective switch or bad solder joints connected to the switch. Boss uses momentary ...

need foot switch for this machine. I need a foot switch for Alesis sr-16 drum machine. I emailed Alesis; no reply. Any suggestions? What you need is 2 unlatched switches 1 for the stop start function ...

Wah wont always bypass when I let off. The switch has probably failed or the pad that actuates it. These things take a beating. Verify that the switch is mechanically working, and then check with ...

red plastic cover over starter switch is broken. No power the little red plastic cover over the starter switch is cracked, i think the fuse may have blown--cannot push the starter switch down--no ...

on/off switch not working anymore I have a Baldwin Interlude with fun machine bought back in the 70's - Model #127W and Serial #27028-B - the on/off switch is not working anymore....where can I get a ...

Some one broke off my power switch, I still have all the parts but the switch itself is missing the two plastic nipples on either side. Where/ how can I get a replacement/repair? -thanks It is very ...

how to replace the light in the standby switch on a bugera 333 head ? I don't believe the standby switch has a light, unlike the main power switch. I can also understand why they don't include one due