Troy-Bilt Pony Garden Tiller "replace shaft tine" Questions

...tine assembly fell off shaft....after replacing broken bolt left side tine assembly wobbles...help sounds like the shaft is either bent,or the inside diameter is worn and the shaft tube needs to be ...

...17in Model 917-294271 -Check the locking bolt that hold the tine shaft to the main shaft. Possibly it's broken. If so replace new bolt. you should be good to go again. Good Luck ...

Replace tine shaft oil seals - Junior model How do I remove the tine shaft oil seals on a Troy-Bilt Junior V (Mod # 15006, S/N M0104189)? The outside of the tine drive housing has a silver-colored ...

...the tines off to replace the seals. The tines sometimes get frozen to the shaft. You might try penatrating oil and use a heat gun or hair dryer to heat to loosen. Also tap wiht a hammer around

...shaft, and thought I should best leave alone. Carefully replaced cap, and tightened down, and now the tines and drive to wheels will not engage. Removed cap again to check that everything is seated, ...

best way to fix the problem motor runs good, drive belt replaced already, when put into gear tines will not engage, how to remove rear tines and seals?? look on the shafts the tines ride on and see if

...shaft.(It has a slotted head) Pump in grease until it comes out the air vent. Replace the air vent screw and the tines. It appeared to me that there was probably never any grease in it as it took ...

...replace the bearings and shaft seals. I tried to press it out after removing the bearing seal retainer and cleaning all the grease from the gear housing. It looks like it comes out from right to left ...

...shaft with sandpaper and oil it to get each tine off in order. Some tillers use a different method of tine installation, since this can be patented or trademarked. For example, some have the tines ...

...replace the seals on my Troy-Built Pony tiller. 6 hp, ser.# 121811201149. I can not seem to remove the tine shafts. I have pulled the bolt thru the shaft but cannot budge it. Does anyone know what I ...