pump keeps turning on and off when trying to run sprinkler system My pump dose not come on it just humms.
pump is working, have bed airlock, water then comes out of hose, but, then dies again, do I just keep on bleeding it, had plumber around yesterday, he bled it, it seemed good for 10 seconds after he ...
pump turned on and off but did not stay on for a long enough time to stop water from coming into the basement. We have it placed by our French drain - should it be in the drain? top of the drain? next
...pump.coming from what looks like the underside hallow area where u can see the shaft.....Had to remove the pump after only one full day of operation. Is this a defect ? i will go to my supplyer to ...
pump (RPM 3400, GPM 24) has been working fine for 8 years (summers only) but now keeps tripping the circuit breaker soon after water comes out. Doesn't seem to be any blockage. Maybe just worn out and
there is power to the pump, but the pump will not come on. It has a pressure switch, the contacts are making contact, but the motor doesn't run. what should i check for? Sometimes around the area of ...
My sprayer is new, but does not keep the pressure, any idea's? It's a 2 gal, pump up type sprayer. Check under the lid/cover for a rubber gasket. This may have gotten unseated when putting the
...pump keeps on hunting(stop/starts all the time) set at what ever the cut out on the pressure regulator is set at- if set to cut off[out]at 50 will pressurize tank to 50 and stop pump- will come on ...
...pump. I have had to fix this problem several times. However, the problem keep coming back. The problem exsist with the fitting either going into or exiting the pump. The threads somehow work lose and ...
...coming out of the pump (outlet side), you will need to install a PRV. I have mine set at 50, although you can set it to whatever you like. Keep in mind that the pump will continue to run after there ...
131 questions posted
Usually answered in minutes!
62 Questions
