pump is working, backup valve working(legend is getting water flow), but the wheels are not turning, it just sits there except when backup valve cycles. You might want to pull the drive wheels and see
pump is still running but it is not doing anything I have changed filter and checked for blockages but can't find any problem has the impeller fell off the motor shaft??? or striped the drive key off?
Question about Pentair Pool & Spa
pool, a 1 hp pump for 14,000 gallons of water might to be over driving it? So the pump could be slightly larger than needed? But it really isn't that much larger than req'd, if you already have it. So
the vacuum is not picking up the debris in the pool if it drives ok, then it should be the water pump motorif you see the water bubbling at the top of your pool then the vacuum part is working
...pump. Remove back cover of motor. Drive shaft of motor either has a slot on end for a large screwdriver or a flat on it for a wrench.(usually 7/16) Hold shaft and unscrew impeller. Mine had a sleeve ...
...pump run but the unit will not roll You might need to perform some maintenance on the automatic pool cleaner wheels and drive system. Remove debris or tree leaves caught in the axle bearing. Do not ...
drive wheels are not turning, there is power to the pump With the simple construction of the pool cleaners, usually a lack of movement means that there is something jammed in the impeller or the drive
95 questions posted
Usually answered in minutes!
337 Questions
104 Questions
92 Questions
