Invacare Supply Group Invacare Pronto M51 Power Wheelchair - Blue - Power wheelchair "joystick lights move" Questions

... Turn the chair on move the joystick forward till you hear a beep then move the joystick to the rear until you hear another beep release the joystick and the lights should quit flashing Hope this ...

Joystick Controller, all lights flashing 5 times then pause a little then again. Was working fine the day before. If I disconnect a wheel, then all lights flash 3 times then pause. Then again. Happens

...press the on button and all the battery lights should be lit and when you move the joystick forward you will hear the electric bake release and the chair should move forward etc Hope this ...

...lights flash left to right..when moving joystick the chair does not move. chair is locked out. turn on then push joystick forward till it beeps then pull backward till it beeps then it is ...

The joystick turn lights on and yuo can hear the The joystick lights turn on and yuo can hear the motor runing, but the chair does not move sounds like it is out of gear

...joystick on Jazzy 1103 ultra On my Jazzy 1103 Ultra the lights were flashing (8 lights were lit when flashing) and the wheelchair would not move at all. It is not the battery it seems to be the ...

lights do not flash. Batteries are holding 12.8 volts each. I have checked all plugs to see if they are connected and everything checks out. hold joystick back, press on button, move joystick forward,

...joystick the lights are moving back and forth as if it is charging but wheelchair does not move Joy When you plug in the charger the lights on the joystick will scroll because of something called ...

...joystick, also the lights won't go out until i disengage the power cable. do i need a new joystick control? Hello, When you say the power cable I hope you mean the cable that comes from the main ...

...JOYSTICK, ALL THE LIGHTS FLASH RAPIDLY AND IN UNISON. WHAT FAULT DOES THIS REPRESENT?? THX U I think you might have a joystick fault but first make sure that the chair is not in freewheel. If the ...