Question about Coleman Electrical Supplies
...generator 2250 was working great then it strated making anoise & it quit puting out 120 volt down to 62volts so I took it apart I checked the rotor & it is shorted out on both fields I was ...
Question about Coleman Electrical Supplies
...hooking to home electrical system May have hooked it to the home electrical system improperly and exposed it to a 220 volt shock You have blown the stator and possibly the rotor due to back ...
...generator when spun backwards. The magnets in the drill's motor induce a voltage into the motor windings, which is fed back through the trigger, cord and into the generators receptacle. From there it ...
...generator runs but no electricity no electricity If it has sat, it may have lost it's rotor residual magnetism. Disconnect the rotor field wires at the AVR or on the exciter/brushes. Note they are ...
...generator runs but will not generate electricity If it has sat, it may have lost it's rotor residual magnetism. Disconnect the rotor field wires at the AVR or on the exciter/brushes. Note they are ...
...generator do not produce electricity.voltmeter shows no voltage.I already changed carbon bushes and later AVR.But unfortunately the result in vein. If the unit has sat a long time, the rotor may have ...
Question about Electrical Supplies
electrical connectors and remove the 120/240 volt wiring from the terminal block. See second picture below. Remove the ground from generator to wiring cable assembly by removing the bolt that connects
...generator starts up but no power being pushed out y If it has sat, it may have lost it's rotor residual magnetism. Disconnect the rotor field wires at the AVR or on the exciter/brushes. Note they are ...
Question about Coleman Electrical Supplies
...generator when spun backwards. The magnets in the drill's motor induce a voltage into the motor windings, which is fed back through the trigger, cord and into the generators receptacle. From there it ...
Question about Briggs Electrical Supplies
...generator, the stator is the non-moving frame or housing. The stator holds the stationary electrical windings. The rotating windings are on the armature or rotor. The rotor is ...
2 questions posted
Usually answered in minutes!
20 Questions
7 Questions