TORK Digital Interval Timer Ssa100r-24 "old wire" Questions

Ad

Question about Intermatic Hardware & Accessories

1 Answer

...wire Old switch has 2 screws with wires on each. One wire is Hot-from breaker and this connects to timer-black wire. One wire Goes-to-lights and this connects to timer-red wire. If you get these two ...

Ad

Question about Hardware & Accessories

1 Answer

...old timer-blue wire connected. Other timers require wiring that is bit different, but the page link above shows the wiring ... and you can re-post another question any time >>> or respond to ...

Ad

Question about Intermatic Hardware & Accessories

1 Answer

Old timer connected to two (2) wires and your timer has four (4) wires on your switch, Can you tell me how I can make this work?? ON the new timer connect the Blue wire to the wire going to the light.

Question about Intermatic Hardware & Accessories

2 Answers

...wire-connector on the old timer (black), and one to another (blue) (one of these also went to the next switch in the box). On the old timer, the third (red) wire had been unused. In the rear of the ...

Question about Aube Technologies Hardware & Accessories

1 Answer

...2-wire application If old switch is 3-way, the Aube changes to 3-wire application, the only major change is jumper on other 3-way switch Timer replaces ordinary wall switch: Timer replaces 3-way ...

Question about Intermatic Hardware & Accessories

1 Answer

...wire connected to first old switch. It might be attached to a different colored screw, or find markings on old switch. Connect BLACK wire from switch timer to COMMON wire, using a twist connector. ...

Question about Woods Hardware & Accessories

2 Answers

...wire to operate the electronics located inside timer. You said your old switch has 3 wires. The new timer can only replace on-off switch that has 2 brass screws and a green screw. If old switch has 2 ...

Question about General Electric Hardware & Accessories

1 Answer

old one has a black and white wire. The GE has a black, white and red. Black to black and white to white, leaving the red unattached does nothing. Any ideas? You old timer was a simple one-pole switch

Question about Hardware & Accessories

1 Answer

...old T101 into T102... http://waterheatertimer.org/How-to-troubleshoot-Intermatic-timer.html http://waterheatertimer.org/How-to-wire-T104-Intermatic-timer.html#T101 Add a comment with what you ...

Question about Intermatic Hardware & Accessories

1 Answer

...old 'was-3-wire and now-2-wire' problem. I tested and wired these timers. Aube timer has internal rechargeable battery, and therefore does not need another wire to run internal clock. GE timer has ...

Not finding what you are looking for?
TORK Digital Interval Timer Ssa100r-24 Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Top TORK Hardware & Accessories Experts

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66847 Answers

Are you a TORK Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...