Toshiba e-Studio 2551C Multifunction Color Copier "fax error answer" Questions

error When Im trying to send fax after it feeds the document I have a TX ERROR coming up on screen and the report types : receiver does not answer, when I know for sure that receivers fax is on. And I

...error displayed fax line comes up with com error c002 , maunal staes poor phone lines have had verizon out they say line is fine ? Fax works to most other faxes and I receive faxes what might be ...

...says recieve error take the power out and hold the red button in. put the  power back Take a look at my answer to "Our fax machine says recieve error and will not recieve faxes". Yours is the ...

fax begins sending. Note If an error occurs during sending, the fax beeps intermittently for a few seconds and an error message appears on the LCD. If this happens, correct the problem and then press

...fax numbers are correct. error 634 is an indication that the line was either busy, or there was no answer on the receiving end. press the monitor key and listen for the dial tone or Plug a regular ...

...it sound like your machine is set to answer in manual mode. should be button on cotrol panel to set answer mode. when it in manual mode fax will ring but nothing happens till you hit start

...FAX SETUP from the Lexmark menu. You may have to change any or all of the following: RINGER SETTINGS, AUTO RECEIVE, RECEIVE MODE, TONE/PULSE DIALING, OVERSEAS MODE, ETC. Trial and error getting the ...

incoming Faxes We can send faxes but cannot recieve any. Is this a setting error? sir, first you have to set the fax machine in auto answer mode.so that you can automatically recive the incoming faxes

them. Having recognised the the fax signal from incoming faxes an error message comes up saying "no answer from remote fax". see if your fax is on fax mode. the button is next to the display

...fax, an alarm is set and the error code 5003 and something about not having answered is displayed. We have succesfully sent a fax, but the receiving of faxes is missing. You could try a DSL filter, ...