Question about General Electric Washing Machines
...will not run power going to the machine and door and we have replaced the top user interface panel There's a screw at the top of the tail light cover. Remove that and pul whole cover straight ...
Question about Washing Machines
...remove the drain pump for any reason, you will need to disconnect it from the electrical wiring and water hoses. Be sure to unplug the machine from the wall outlet before attempting to do this. Once ...
...remove one screw behind dispenser drawer front and one screw at each upper corner of control from back side of control. Panel is still held by tabs across top. Be careful, as there are sharp areas ...
...Remove the (2) screw holding the switch assembly to the front panel. 7. Pull the switch assembly into the door opening and unplug the electrical connectors. Install is the reverse of removal. Thanks ...
Question about General Electric Washing Machines
Do you have to remove back panel to get to rocker arms? Need to check for issues. You remove the front panel. There is a diagram inside the control console to show removal and troubleshooting.
remove all screws holding the pump in place. The electrical should be a quick disconnect adapter. It might help to drain the assembly first -- just follow the instructions in the Use & Care manual
electrical connections. Remove the last two screws for the control panel ( which are now visible). Disconnect the electrical connections 2 or 3 as well as the safety override wire. (These are all plug
...remove all screws holding the pump in place. The electrical is a quick-connect adapter. Save yourself a mess by draining the assembly first -- just follow the instructions for draining/cleaning the ...
...electrical supply and release the console. 2. Releasethe bellows fromthe front panel and remove the (2) screws holding the door safety switch assembly to the front panel. 3. On select models, ...
...electrical supply. 2. Remove the top panel and disconnect the wire plug to the pressure sensor. 3. Reconnect the washer to the electrical supply. 4. Press start and wait 10 seconds (washer will drop ...
18 questions posted
Usually answered in minutes!
522 Questions
457 Questions
351 Questions
272 Questions
222 Questions