Bosch Classixx WFL 2066 Front Load Washer "1200 washing machine motor" Questions

...connector, lever the motor back with a screwdriver. Check the motor brushes, if they are any shorter than 1 cm replace brushes. how do you remove the brushes on a Bosch Classixx 1200 washing

1200 Disconnect the power disconnect hoses lay machine on it's left side remove back cover screw and cover slip belt off pully unplug motor wires undo bolts holding motor pull motor to rear of machine

...1200 which fills & drains but doesn't wash ? This a classic example of worn brushes in the motor. To check , remove rear panel, remove drive belt. Unplug motor lead, undo 2 screws that secure motor, ...

...1200 washing machine, the drum has stopped working only the small impeller at bottom front of machine is whirring I would say that the brushes want replacing in the motor, access to the motor is by ...

...1200 Express Washing Machine spin not working I had the same problem- machiine not spinning and a few days later not turning at all. Display would go from 11min to 1min. I did 2 things - 1) changed ...

...1200 washing machine. Its filling up, and draining but the drum's not spinning or going round at all. I can moveit freely though when the washing machine isn't on??? Any ideas on whats wrong and how ...

...1200 which is fitted to the end of the motor where the fan belt sits on The pulley is not available as a seperate item, it is welded onto the motor shaft, and means a complete motor is needed. Please ...

Creda Excel 1200 W120VW Front loading washing machine Drum not rotating during wash or spin cycle - any suggestions please? check motor brushes for a start

...1200 washer drier? my washing machine is fully loaded with water, how can I get the machine to drain off the water? Motor/drive problem. ...

...1200 wm72 my hotpoint washing machine keeps showing error code 30 refer to manual i have not got a manual can you help. it's a motor problem. could be as simple as the brushes or could be the circuit ...