Kirby G5 Bagged Upright Vacuum "problems removing handle" Questions

Repack the Hoover Floormate How do you remove the upper handle of the Hoover Floormate, so I can ship it back to HSN. Regards, Phil Did you ever get the handle off? I'm having the same problem. ...

bissell 1970 quicksteamer water runs out of clean water tank Try re-installing the handle. Remove the screw on the back of the machine and pull up on the handle. Once the handle is removed pull the ...

How do you take the handle apart? Epic 6500sr I have a bad contact in my handle. my carpet brush goes on & off as we vaccuum. I have narrowed in down to the handle. How do you take the handle apart? ...

...removing the screw that holds the handle to the vacuum. What size phillips screw driver should we be using? If the screw is stripped, how can we get it out to replace it since it is not easily ...

Hoover Spinvac F5915900. Trigger no longer causes a release of soapy water on floor. It doesn't have tension, fairly loose, but still in slots. How do I fix this problem? Upholstery brush works fine. ...

How can I fix my Hoover spin scrub 50 solution trigger? It is not working. When I pull the trigger, it doesn't feel like it is attached to anything. It is not dispensing the cleaning solution. Hey ...

will not spray the water This will not spray the water or cleaner out,only pick up................................. HELP if this is a new model take of the handle ,If you look down were the handle ...

No Power to Windsor Sensor XP12 My company's windsor sensor xp12 has no power getting to it and I have changed the bag, cleaned all filters and beater brush to no avail. Can you help me? The vacuum is

i plug my vacuum in and turn it on and nothing happens. checked different outlets and still the same problem. Check the following: - The handle may not be installed properly, causing a loss in the ...

No water or soap flow I haven't had any problem with my cleaner until I got it out of the closet to use and it won't dispense any water or soap. Suction is good. Checked all belts, filters, etc. All ...