Kirby G5 Bagged Upright Vacuum "backwards going" Questions

Ad

...angle of the handle since once in awhile it will start to run going forward but always runs going backwards Are you sure its not just your belt on the beater of head slipping and needs to be

Ad

Question about iRobot Vacuums

1 Answer

...going backwards Ours goes backwards ONLY now... was stopping and starting then dying... now it only goes backwards and rides up onto the furniture and stops. Did the fix mean sending it back and ...

Ad

Question about Kirby Vacuums

1 Answer

my kirby g4 motor runs backwards and so the power drive when pushed forward wants to go backwards. I need the wiring diagram so I can get it wired correctly. The wires to the switch, coming from the ...

Question about iRobot Vacuums

1 Answer

Runs but doesn't vacuum/****. Sidebrush works fine. Cleaned the roller brushes, and that seemed to confuse the robot and now it keeps going backward a few inches, turning, and then starts going ...

Question about iRobot Vacuums

3 Answers

...going backwards on start up. if you are good with electronics you must take it all apart (web site will help you) clean all the connectors on the main board and it will work like new. there is a web ...

Question about Kirby Vacuums

1 Answer

...going forward it actually goes backwards with ease and forward with work. Any suggestions? I'm not familiar with this type of vacuum, but if it's like most kirby's the powerhead gets all its motion ...

Question about Shark Vacuums

1 Answer

It lost suction. How can I fix it? Are all your filters clean? Start with end of hose and go backward. Hose, small dowel. Make sure clean. Then, next section motor or hose. Keep going.

Question about iRobot Vacuums

1 Answer

it will only go backwards 530 model will only go backwards. Have tapped the visor many times as advised but its not worked this time. Help Disassemble and clean the switches located behind the wheels.

I have a Electrolux Vacuum that is around 25 years old. It works good, except the hose is stopped up. I would like to know how to go about unstopping the hose. What may work is to hook another vacuum ...

...wheel switch is clogged and clear it. I had the same problem. This is the 9-beep error. It goes in backwards circles. Pretty much a bad component in your Roomba, makes it think that it is constantly ...

Not finding what you are looking for?
Kirby G5 Bagged Upright Vacuum Logo

261 questions posted

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Paul Bade

Level 3 Expert

1818 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...