Kirby G4 Bagged Upright Vacuum "unlock handle" Questions

...handle to unlock it, then pull the tank out by the handle. 2. To remove the dirty water tank, slide the latches open located on the sides of the cleaner that hold the tank to the base of the cleaner. ...

...You will see what I mean when you unlock that screw and slide the lower handle just a tad , but the wheels must be in the engaged position in order to adjust it properly. Hope this helps! William

...unlock the handle). I know I should probably just replace it but even with the noise and handle problem, it still works fantastic. Is there anything I can do to fix it; and where can I get the parts? ...

backwards, cam Make sure the plastic flat head locking mechanism at the bottom back is in the unlock position. Then simply push down on the front while pulling handle back. No button or lever involved

...unlock this tab, push the handle all the way down, and then close the tab again. Hopefully this should take care of it for you. If you have any other questions about the Sebo, I love sharing my ...

...off of the machine. -OR- There is a handle on the top of the tank, lift that handle straight up unlocking the tank. Best of ...

handle to release to run the vac On the lower right side of the body of this model is a air duct piece that can get stuck and won't allow you to use the release. Take out that piece and put it back on

...unlock the main spindle pipe. At the same time ensure that the bag clip at the bottom has been unclipped and the cord is also free, taken off the hooks at the back. The main pipe/spine at the back is ...

...unlock handle on Kirby Sentra Release the belt tension by using the handle on the Belt Lifter to turn it all the way to the right (clockwise) until the green arrows line up.
For more information: ...

...unlock the handle with the cable. Or there may be a twist lock dependent on the vacuum you have. Replacement handles with cords are available to buy online but if you are good at wire/electrical wire ...