...assembly and attach the hose. Mix up the solution in the "Suds o gun". Attach this to the end of the hose. When you switch on, foam will dispense from the gun. Gently sponge this into the furniture. ...
...furniture? Just above the power button is the purple, ribbed section that pushes in for releasing the hose. You press in and lift to release the entire hose assembly. You then pull the hose down to ...
...assembly to the rear of the vacuum. Remove the dust bag cover. You will see two holes just above the upper corners of the dust bag. Remove the screws from these recessed screw holes. Open the ...
...furniture and you forgot about it. If the problem keeps happening, take the brush and belt back out and carefully turn the machine on to see if it makes the sound. If it doesn't make the sound with ...
...assembly to the rear of the vacuum. Remove the dust bag cover. You will see two holes just above the upper corners of the dust bag. Remove the screws from these recessed screw holes. Open the ...
...assembly and put the hose on the side where the bag came from. Remove the power nozzle and put the intake guard onto the front. (this is in your attachment set...the only one with little hooks that ...
...assembly that actually runs across the on/off switch. Using a small screw with a large head. I pre-drilled a hole at an angel at the spot that runs across the buttons, screwed the screw in place. Now ...
furniture fur free. If the roller brush is not spinning freely once you remove it from the Power Mate Jr., then I have discovered the solution! There are end caps at each end of the roller brush. They
com/assets/0/132/134/228/d1415b2a-fe3b-4d35-860d-3833563ed28e.pdf The general directions: move your furniture out of the way and plan your path so that you can leave the room without crossing the just
426 questions posted
Usually answered in minutes!
625 Questions
223 Questions
207 Questions
187 Questions