Kirby Ultimate G Bagged Upright Vacuum "rotation dial" Questions

Ad

Question about Bissell Vacuums

1 Answer

i cant use the hose how do i switch it from vaccum to hose? There will be a dial on top of the tank that you can rotate 180 degrees which will switch the unit from vacuum to hose. To switch it back to

Ad

Question about Electrolux Vacuums

2 Answers

Electrolux Epic 6000 SR Owners Manual? Got an Epic 6000SR and need a manual so I can figure out what the top dial does (I would imagine suction strength), what the lights are for and general care of ...

Ad

How do I change the belt on my Kirby G 2000 Limited Edition? Lift the head two pedal clicks off the carpet. Lift the headlight and you will find a silver thumb dial to remove the carpet head. At the ...

Question about Kirby Vacuums

1 Answer

Install New Belt My old belt was destroyed so I was unable to see how it was attached. I lost my manual so instructions on how to install belt would be great. Lift the headlight and rotate the thumb ...

Question about Dyson Vacuums

2 Answers

beater brush does not rotate took off plate and cleaned off brushes i had the same problem, but was able to fix it by opening the brush compartment and cleaning the brushes, then separating the brush ...

I have a singer 4411. when I start to sew, the length dial rotates to zero on it's own I taped the dial in place to be able to sew. I have the length set at 1 1/4 this link is the manual ...

Question about Bissell Vacuums

3 Answers

I have the bissell pro heat pet 2x and my brushes won't turn or operate... check the belt belts ok brushes won't turn/rotate turn dial on bottom front on the water tank to floor not tools..p.s. they ...

Question about Dyson Vacuums

1 Answer

rotation ? If yes then firstly switch machine on then when you pull handle back as if to vacuum the carpet the clutch drive dial must turn to (drive, start, on,) position if it is stuck on (park, off.

UNABLE TO FIT BELT ON MY ULTIMATE UPRIGHT G BAG VACUUM CLEANER. You need to disengage the carpet head from the vac itself. Do this by lifting the headlight and rotating the thumb lock underneath. Then

Question about Dyson Vacuums

1 Answer

Brushbar not spinning Vacuum has a good tight belt, however the belt does not rotate when the vacuum is turned on, therefore the brushbar does not move. Help? did you make sure that the dial is set to

Not finding what you are looking for?
Kirby Ultimate G Bagged Upright Vacuum Logo

733 questions posted

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

JoeVacs

Level 2 Expert

445 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...