Kirby Ultimate G Bagged Upright Vacuum "remove plastic hose end" Questions

Ad

Question about Miele Vacuums

1 Answer

remove the hard plastic thing on the end to remove the clog If you can safely remove the whole hose the best way is with compressed air or I sometimes use a long flexible wire to pull it out. The hard

Ad

...remove plastic bag stuck in dyson hose Thanks, sonic boom electronics, for the idea to shove the garden hose up there. Our hose is nice and narrow and it worked perfectly! I pushed it through one end ...

Ad

...remove the plastic end fitted to the flexible hose my flexi hose has split about one inch from the plastic end fitting that slides along the metal tube. it must be possible to remove from the flexi, ...

...hose into the end and screw it in using an un do direction if it is the plastic fitting itself that is broken then weld the broken section back together Basically use a soldering iron and heat the ...

Question about Kirby Vacuums

1 Answer

...plastic part that connects to the vacuum. You can find it HERE. To remove old connector you may have to submerge the end of the hose into hot water (not to hot to touch) so the vinyl becomes soft and ...

hose all the way to the end at back bottom of vacuum where it inserts into hard plastic s-shaped removeable attachment. Removed this attachment and SO MUCH junk was clogging it....(i carefully removed

...remove the two screws in the top of the handle that hold the top plastic piece. This can be a challenge unless you have the right tool. It's essentially a hex-star allen wrench tool that is required, ...

Question about Bissell Vacuums

1 Answer

...plastic fitting a button inside is no longer depressed and a valve shuts of the water flow to the rotating brushes. If this valve is clogged with gunk it will not release when the hose end is pulled ...

...plastic that we have no idea where they came from It's possible they came from the fan/impeller. If so, there will be minimal to no suction at the power nozzle or hose end. Remove the hose end from ...

...hose will pull out of the plastic housing that attaches to the vacuum. Don't pull on the corrugated hose section or you will ruin the whole assembly. I took a pair of tin snips and CUT the old hose ...

Not finding what you are looking for?
Kirby Ultimate G Bagged Upright Vacuum Logo

733 questions posted

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

JoeVacs

Level 2 Expert

445 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Chris Nomland
Chris Nomland

Level 2 Expert

124 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...