Kirby Ultimate G Bagged Upright Vacuum "put dirt bin back" Questions

...put ery thing back ....as soon as i start it , after 2 second machine change its voice...and loos suction. I think its just happen because ...the saftey yellow valve inside the machine turns up ...

...dirt in its bin. Why would that be? Most common issue is the filter is clogged try washing it out make sure you let it dry completely before putting it back in. replacement filters are available on ...

...put the dirt bin back on, and my Roomba worked! I had the same problem - 3 beep codes. According to iRobot's beep code table, this meant "The robot's vacuum is stalled". To verify this, put your hand ...

dirt - the worst for cutting suction is the powdery greyish white powder which always clogs the mesh filters. Then before putting everything back, take the bottom hose out of the front by unhooking it

...put it back in; it works for a few minutes and it stop again. Neato's dustbin, when inserted into the recess, makes contact with a switch that indicates that the dustbin is in place. First, ensure ...

...Put it back on the vaccum and now it doesn't have much suction. Hi there, Sorry to hear you're having difficulties with your DC17. If dirt seems to be building up on the shroud, you can ...

...dirt collection bin. There will be screws behind that as well. On the bottom there will be screws that hold a cover over the beater brush. when that is removed you should see the belt and the slots ...

...put it in the vertical position to use the hose, there is no suction at all. I've cleared any place that there could be an obstruction. Also, in th e upright position it has suctions for about 3 ...

dirt was escaping. This was causing the problems and way overclogged the hepa filter. I just had to slip the rubber seal back down into place where it belonged, and also thoroughly wash the the filter

...put it back properly, but now it will not click into the upright position.The brush is working, and the vacuum is not picking up the dirt very well. Can you help me? Hi, Try this quick repair and see ...