Honda Karcher G2400HH-R Pressure Washer "problems low" Questions

gas pressure washer My unit starts up fine; cleaned out the filter and hose, got a new spray nozzle and fittings, changed the oil, but when Icrank up the unit it will not produce any high pressure. ...

...the low pressure setting. Look for the nozzle with the largest opening. It's normally Black if they are color coded. Switch to that one and try it again. You won't have any problems. Best regards ...

...problems. First of all with all respect, the shop from where you bought the machine, must have told you all necessary instructions to operate your machine. Now the soap always works on low pressure. ...

water pressures varies from high to low. Not idling right checked for a problem nozzle, low inlet water pressure to the pump or faulty pressure regulator.

It starts easy and runs for about 10 minutes and cuts off. Have to wait 30-45 min. to restart with the same cutting off problem. Have always had a problem with restarting even when I shut it down on m

low pressure builds pressure in unit, then when I squeeze the release trigger pressure is low.....cleaned nozzle tip and ran water through pump without power to clear any air in system, but problem ...

low pressure from pressure washer pressure build inside unit, but when I squeeze unit the water flow is very low...I cleaned nozzle tip and ran water through the unit to remove air from the system, ...

Karcher G 3000 BH Engine Pumping Problem I have a Karcher G 3000 BH pressure washer with the Honda GC190 6.0 HP engine. The engine starts and idols fine, but when using the pressure washer, the engine

a gas power waher 3500 psi ,with a honda gx390..Start proper but after 15 minutes turn off by it self.How i solve this problem?? hi there aldao62367 if the oil level is at correct level , check that ...

My machine runs for a few minutes and then abruptly quits. It sounds like it's running out of gas, but it isn't. It has plenty of gas. I'm not a mechanic and don't have a clue what'