Honda Maxus Pressure Washer MX5222 "soap dispenser working" Questions

...soap dispenser to work.  These tips are usually red, green, white or yellow and they cause too much back pressure at the dispenser for it to work.  You need to use the soap tip, ...

...HOW TO USE SAOP/SOLUTION CONTAINER soap dispensers only work wit no or low pressure nozzels. when you have high pressure nozzles there is too much back pressure for the soap dispenser to function

...pumps with our system. 2 of the pumps are not dispensing product now. Any suggestions? flush unit soap dispensers with hot water, check soap valve for ...

the soap dispenser does not work any more the soap will only pull when using the soap nozzle they dont pull up the soap while under higher pressure or just use no nozzle at all

soap dispenser to work. Start and Stop most soap dispenser systems will only work on low pressure. depending on what washer you have. on most machines, you can switch to low pressure by either turning

can't get soap to feed into system I have a SIMONIZ S2000 electric. I bought the unit about 8 weeks ago used it once. On the second use yesterday the unit didn't work as well, the pressure seemed only

...you are using one of these there will be too much back pressure in the line for the soap dispenser to work.  You have to use the low pressure, soap tip, usually black, for this function to

...soap tip so there isn't too much back pressure in the line for the dispenser to work.  If you are using the black tip, check the dispenser line and fitting where it connects to the line for ...

...the unit didn't work as well, the pressure seemed only a bit better than hose pressure and soap did not dispense at any pressure. SO.... after much thought I turned the hose/tap pressure

...soap dispenser There doesn't appear to be any soap moving through the tube. Used to work, but doesn't seem to anymore. Any thoughts?? Nozzle dirty, clean out nozzle with small diameter wire. Soap ...