adjust idle up on poulan pro 42 cc chain saw I need to adjust idle on my chain saw. It will not idle and needs to be adjusted up. Won't idle when you are not cutting. Adjust the low side out another ...
Question about Husqvarna Garden
idle down dealer told me it wasnt in the adjustment that is probably a seal on the crank. Has anyone had this problem 18 " chainsaw The dealer could well be correct, if a two stroke engine has an
idle We just bought a brand new 18" 42cc Poulan-Pro chainsaw. When we first started it, the chain moved while idle. We tried to adjust the idle speed with the idle screw just as the manual stated, but
Question about Poulan Garden
...18", will not idle after throttle is released. I have a poulan wild thing, 18". I have trouble getting it started. When it does start it will idle, but seems to quit after I pull and release the ...
where is the idle adjustment screw on my 42/18 on the left side of saw above primer button is a hole going to the carb, the screw is there below switches.
poulan pro will not idle The screw to adjust the idle is in the hole right above the primer bulb. Turn it clockwise to increase idle speed.
my chainsaw stards for a few seconds and stops First make sur your fuel mix is correct and thoughrlymixed. Shoul be 50:1 mix. Next make sure you try starting with switch in choke position and pull ...
Idle adjustment My chain saw won't idle and i need to adjust idle screw up to get it to idle. I am not sure how to do this. First start with the initial settings on both low and high side. They need ...
dolmar 6800 what are factory settings for high low idle The idle speed should be NOT QUITE high enough to rotate the chain when the chain lock is not engaged. There should be NO adjustment for high ...
races at idle If the idle cannot be controled by the idle screw ( screw marked with an I or T on the side of the carb ) then you may well have an air leak through a crank seal or a gasket.
708 questions posted
Usually answered in minutes!
457 Questions
255 Questions
170 Questions
