pull on the cord to see if it will work and that the cord returns back into the recoil automatically. Don't take the nut off the inside of recoil holding the cord spool on. If the engine is not seized
...CHAINSAW .... pulled out cord too far Hello, Nice little chainsaw for th $$$. I pulled on the cord too far, and too hard, and now the cord does not return inside the chainsaw, and neither can the ...
...pull cord. You could be pulling so hard and jamming it with each jerk of the cord. Slowly pull the cord to the end of its travel and make a mental note of that distance....then force yourself to stop ...
pull cord wont recoil homelite xl 12 pull cord does noy have enough tension to rewind all the way You will need to take the cover off to get to the recoil, then remove the pull handle do not let go of
pull cord on my chain saw will not recoil 372xp husquvarna starting cord will not recoil. Off hand I would say the recoil spring is broken. they can be a bugger to replace. I would remove the cover ...
pull cord will not recoil. what do i do? the spring behind the cord was just assembled and went to pull it and it wont recoil the pull cord. It needs a pre-tension. At about 1 minute and 22 seconds it
...have to turn the spring mechanism in the same direction as if you are pulling the cord.once you get the new pull cord attached release the spring so it unwinds back and pulls the cord in the
...pull the cord and see if either the dog ear is broke or something else is...this is an easy fix, recoil assys are not expensive at all... it all starts with that pull cord assy. Should be 4 screws ...
black decker problems Motor ok but pull cord will not recoil. suspect a broken recoil spring
...cord and rewound it. I got it to start on the third pull. I was using it and it stalled out. Tried pulling the cord once and it was siezed up again. Now that I'd like to clear some atv trails, I need ...
520 questions posted
Usually answered in minutes!
529 Questions
514 Questions
353 Questions
122 Questions
131 Questions
