Jacuzzi - Bathtub - Alcove - Navona - R105917 "caps jetted" Questions

jetted bath? Hello, You should be able to remove the access panel and just disconnect, and cap the hose that is connected to the pump for the jets and then cap the pump nipple, where the hose connects

aqua glass whirlpool tub leaks. looking for closure caps to close off the jets for good. To my knowledge there are no closure caps for your tub; you can however purchase new jets with new seals if the

...CAPS THAT I COULD JUST SCREW IN PLACE OF THE JETS AND HAVE A NOIRMAL TUB WITHOUT HOLES. OTHER THAN THE HOLES THE TUB IS OVAL AND SMOOTH ALL AROUND. THANK YOU FOR YOUR HELP. I have worked on jetted ...

can you cap off an old jetted tub currently there are no solutions out there for plugging off the jets in a whirlpool tub.

can you cap off the jets of a whirlpool tub if you no longer use the jets? you can but it's not worth the trouble of doing it! lots of fiberglass and you need to have access to the whole tub on the ...

I have a whirlpool tub and need to find some caps to cover the jets. Not sure what brand tub is, sides are all covered. Can you help? 6 jets. try a plumbers shop as it is a whirlpool tub you state ...

I have an aqualux whirlpool tub w/ cracked jet housing Hi. I have an aqualux whirlpool tub, installed by the builder. We just used it for the first time in 4 years (not smart I know) and found that at

Can I disconnect one of the jets on my Jacuzzi brand jetted tub, so I can use less water and still have a water level above all the remaining jets? To disconnect one of the jets to get more water flow

I have a inground pool, It seems there is a leak somwhere in the jacuzzi jets. I real don't use the jacuzzi part that often. Is there a way to cap off the jet holes. rather thatn going through the ...

my deep well jet pump is not workin it is just humming but has power to it Hi. The most likely cause is the start capacitor, located under the cap on the end of the motor. Trip the breaker before ...