Question about Culligan Tools & Hardware - Others
...back to front, It only leaks when turning on faucet from large black hose going to no wherer That's the drain for the reverse osmosis system. It should be tied into a waste line under the sink. ...
...Faucet/Air gap is clogged. Need to dislodge the debris. Normally when it leaks out the weep hole the drain line is plugged under the sink....turn off the ro to where it's not making water, disconnect ...
Question about Culligan Tools & Hardware - Others
...faucet to relieve the pressure. It depends are where it is leaking form. If you just changed the filter it is either not on all way, the o-ring is pinched or missing, or the inlet line, outlet line ...
Question about Culligan Tools & Hardware - Others
...leaks in the RO unit. All too much pressure in tank will do is cause low or no product water in RO tank. Older Culligan RO systems (H8, H83, H5) had fittings that used metal locking washers and these ...
Question about Culligan Tools & Hardware - Others
...leaks--i have turned it off because of the mess--i would like to fix it and can i do this outside of the kitchen so i don't have to clean up so much water Your question is difficult to answer until ...
Question about Culligan Tools & Hardware - Others
Culligan reverse osmosis filter system has stopped providing water from the sink mounted faucet attached to the system. (NOTE: Product listed was the only option available. Actual product is Culligan ...
...leaks. Inspect and lubricate the o-ring (every filter change) and replace it yearly. The best way to remove a stubborn filter canister is to shut off the incoming water, bypass the water softener, go ...
...to the RO tank and pull tank out. 6. Remove the line to the RO drain. a. If there is an AIR GAP faucet this line may go there first b. plug the whole for RO drain or replace the standpipe 7. ...
201 questions posted
Usually answered in minutes!
191 Questions
163 Questions
96 Questions
123 Questions