Question about Poulan Tools & Hardware - Others
...key that keeps the flywheel from slipping on the driveshaft. The spark coming from the magneto is not causing the spark plug to fire at the exact time it is supposed to. You will need to remove the ...
backfiring Backfiring is either burned valves or often due to timing slipped because of broken flywheel key/keyway.
Question about Poulan Tools & Hardware - Others
...If there is a good spark and fuel getting to the plug there are only two reasons why it will not fire, sheared flywheel key knocking the timing out, or it has partly seized and has low
Question about Tecumseh Tools & Hardware - Others
...Checked flywheel key and valves, all looks okay. Is it a bad deal on a new carb or what? I'm ready to throw it away! Sounds like the timing may be off or maybethe exhaust valve maybe hanging
...key way it is what times the fly wheel to the engine if not it is possible that it coul have problem with a valve or engine timming I dont know if this is a solution..but i had the same issue with my ...
Question about Briggs & Stratton Tools & Hardware - Others
...bendix construction. Hope this helps! HI, Just a suggestion. Are you sure the gear on the starter motor has the spring in it to push the gear away from the flywheel after you release the key. ?? ...
Question about Briggs & Stratton Tools & Hardware - Others
...KEY, IT IS JUST LIKE THERE IS NO BATTERY IN IT. I HAVE DONE THE FOLLOWING: THE NEW BATTERY IS FULLY CHARGED, REPLACED THE INGITION SWITCH, SOLENOID, ALL KILL SWITCHES CHECK OUT OK, JUMP SOLENOID- THE ...
Question about Poulan Tools & Hardware - Others
...my arm almost out of it's socket. I have returned it to Canadian Tire and they sent it in to be fixed...nothing has changed... Check the flywheel and flywheel key. It sounds like the timing is
126 questions posted
Usually answered in minutes!
36 Questions
9 Questions