Buffalo Tools 4,000 Watt 6.5 Hp Portable Generator #GEN4065 "power generator run smooth" Questions

...power generator doesn't have smooth Idle? I bought this generator many years ago. When first started, the low idle was smooth. When power was needed, motor speed increased and when no need for ...

...power to the panel of my generator My gen was running smooth the previous day no problem. next day it starts, run smooth but no power to the panel. Any Idea. Does changing the sparkplug, oil etc. ...

power 10 hp generator) will only run smoothly with full choke, what's wrong? I have replaced gaskets, needle valve and cleaned the carb. The generator starts easily at full choke, will run smoothly at

generator not running smoothly under load My generator rpm's go up and down continuously when there is a constant load. This is not a refrigerator compressor kicking in or anything like that. For ...

runs but not smoothly; if i pull choke out part way it runs smooth; carburetor plugged? check or replace the carburetor diaphragm.

What's the best choke setting for starting a cold generator Full choke to start, open choke partially immediately the engine starts to where the motor runs smoothly, continue opening as soon as you ...

...generator EF2400iS is not running smooth as I have to pull the choke out a little to smooth it out and it seems to be burning more gas than it was last year. I there an in line gas filter for this ...

Power Pro model 5500 runs fine, but the GENERATOR does not come on. any ideas? The brushes need to be filed smooth or replaced. 15 minute job, remove 2 bolts on the generator cover ( side opposite the

...generator engine only runs smooth with choke half on, what can cause this? also the extra jet on the outside of carb what does it do? Not sure about the "extra jet" on te side of the carb without a ...

...draw by the compressor motor. Depending on the size of the generator and compressor motor, this could cause the generator to stumble for a few seconds, but this should smooth out within 3-5